The RED FAULT light means there is likely a short in the cable feeding to the module. Please check all your connections, especially for proper grounding. The BLUE fault light means there is “over amperage”, but how this over amperage is caused can be

<img width="183" height="51" src="https://attachments.gorgias.help/kREQL2bPdRlxMl8n/hc/eynJd7OpYyx9ERow/2025112714-c2918d04-bcb5-4cd9-8a09-0364715c2c9a-eb69e505-c99e-410d-ab32-456485c96dab.png" style="padding: 0px; border: none;" class="fr-fic fr-dii"><img src="https://attachments.gorgias.help/kREQL2bPdRlxMl8n/hc/eynJd7OpYyx9ERow/2025112714-a05fe45f-35bb-4a16-910b-6b380b6cfb02-wireless%20control%20troubleshooting.png" style="width: 397px;" class="fr-fic fr-dib"><p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;" id="isPasted"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">The <span style="margin: 0px; padding: 0px; color: rgb(255, 0, 0); font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">RED FAULT light<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"> means there is likely <span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">a&#xA0;short in the cable<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"> feeding to the module. Please check all your connections, especially for proper grounding.&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">The <span style="margin: 0px; padding: 0px; color: rgb(0, 112, 192); font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">BLUE fault light<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"> means there is &#x201C;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">over amperage<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">&#x201D;,&#xA0;but how this over amperage is caused can be for&#xA0;various reasons.&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Please <span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">measure voltage at the outlet<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"> where the unit is being installed to ensure there is no voltage drop in the lines. If using an extension cable, please ensure you are using a cable of sufficient gauge, and less than the max recommended length. &#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">All electric pressure washers observe an amperage spike when they are switched on. Please back off the unloader valve by turning the knob counter- clockwise before switching on the pressure washer, and then gradually turn the knob clockwise to build pressure. Failure to do so could trip the circuit breaker. It would also reduce motor life considerably.&#xA0;&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">If the breaker trips before the unloader valve knob reaches the&#xA0;maximum&#xA0;limit, please stop turning the knob. Turn the unloader knob counter- clockwise a little and mark that spot as the max operating condition.&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">To rule out&#xA0;issues&#xA0;with the module, please plug the&#xA0;motor&#xA0;directly to the power source instead of the wireless module, and see if the machine works okay like that without tripping the breaker. If it works fine,&#xA0;then there is an issue with the module itself.&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">If the module is fine, then first look for a clog somewhere in the system. Please visually check the gun,&#xA0;hose,&#xA0;and unloader valve. You may have to take the unloader off the pump to visually inspect it.&#xA0;If the issue is an internal&#xA0;component&#xA0;of the unloader, you will not see anything.&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Please plug the motor back into the module.&#xA0;<ol style="list-style-type: decimal;margin-left: 0px;"><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span data-contrast="auto" lang="EN-US" class="TextRun SCXW242296197 BCX8" style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">Run the machine without a nozzle at the tip of the gun. If it works fine, then the nozzle is clogged.</li><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span data-contrast="auto" lang="EN-US" class="TextRun SCXW242296197 BCX8" style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">If it still goes into fault, run it without the gun.</li><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span data-contrast="auto" lang="EN-US" class="TextRun SCXW242296197 BCX8" style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">If it still goes into fault, run it without the hose.</li><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span data-contrast="auto" lang="EN-US" class="TextRun SCXW242296197 BCX8" style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">If it still goes into fault, run it without the unloader.</li></ol><p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">At each of the above stages, please make sure you are feeding water into the pump.&#xA0;<ol start="5" style="list-style-type: decimal;margin-left: 0px;"><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">If it still goes into fault, then please take the pump off the motor and run it. If the motor spins freely, and the module does not go into fault, please turn the pump shaft manually to see if there is any interference.</li></ol><p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">What we are trying to figure out here is what&#xA0;component&#xA0;is causing the motor to work extra hard.&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Please reach out to us <a href="mailto:support@canpump.com" target="_blank" rel="noreferrer noopener" style="margin: 0px;padding: 0px;text-decoration: none;color: inherit;"><span style="margin: 0px; padding: 0px; color: rgb(70, 120, 134); text-decoration: underline; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">support@canpump.com</a><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"> after this troubleshoot with your order number and findings. A short video of the system would be very helpful.&#xA0;

Wireless Control Module Troubleshooting

The electrical circuit breaker trips when the amperage drawn by the pressure washer exceeds the breaker rating. Please ensure that the installed breaker is rated higher than the amperage rating of the motor. Please measure voltage at the outlet where

<p style="margin: 0px 0px 10.6667px;padding: 0px;font-weight: normal;font-style: normal;vertical-align: baseline;background-color: transparent;color: windowtext;text-align: center;text-indent: 0px;" id="isPasted"><img width="183" height="51" src="https://attachments.gorgias.help/kREQL2bPdRlxMl8n/hc/eynJd7OpYyx9ERow/2025112717-6ffbad1e-92b9-4944-aa3a-f30f50de8208-da06e7d5-43ef-497f-86f3-488d89edceb1.png" style="padding: 0px; border: none;" class="fr-fic fr-dib"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"><img src="https://attachments.gorgias.help/kREQL2bPdRlxMl8n/hc/eynJd7OpYyx9ERow/2025112717-86123ae3-bde8-47fb-9323-4c089d54080b-stock%20breaker%20tripping.webp" style="width: 300px;" class="fr-fic fr-dib"><p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"><span style="color: rgb(0, 0, 0);font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;font-size: 16px;font-style: normal;font-weight: 400;text-indent: 0px;background-color: rgb(255, 255, 255);">The electrical circuit breaker&#xA0;trips when the amperage drawn by the pressure washer exceeds the breaker rating.&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Please ensure that the installed breaker is rated higher than the amperage rating of the motor.&#xA0;&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Please <span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">measure voltage at the outlet<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"> where the unit is being installed to ensure there is no voltage drop in the lines. If using an extension cable, please ensure you are using a cable of sufficient gauge, and less than the max recommended length. For pressure washers rated under 20 AMPs, we recommend using a 10-gauge cable with lengths not exceeding 50 ft. If the motor is rated above 20 AMPs, we recommend not using any extension cable.&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Using multiple devices/ equipment on the same circuit would also cause voltage to drop, and the amperage to consequently increase.&#xA0;&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; text-decoration: underline; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">Setting the Unloader<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">All electric pressure washers&#xA0;observe&#xA0;an amperage spike when they are switched on. Please back off the unloader valve by turning the knob counter- clockwise before switching on the pressure washer, and then gradually turn the knob clockwise to build pressure. Failure to do so could trip the circuit breaker. It would also reduce motor&#xA0;life considerably.&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">If the breaker trips before the unloader valve knob reaches the&#xA0;maximum&#xA0;limit, please stop turning the knob. Turn the unloader knob counter- clockwise a little and mark that spot as the max operating condition.&#xA0;<p style="margin: 0px 0px 10.6667px; padding: 0px; font-weight: normal; font-style: normal; vertical-align: baseline; background-color: transparent; color: windowtext; text-align: justify; text-indent: 0px;"><span style="margin: 0px; padding: 0px; font-size: 16px; text-decoration: underline; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">Troubleshooting the Pressure Washer<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Please ensure that you are using the correct nozzle size. There is a nozzle size calculator at <a href="https://www.canpump.com/1-4-in-quick-connect-pressure-washing-spray-nozzles-set-of-5/" target="_blank" rel="noreferrer noopener" style="margin: 0px;padding: 0px;text-decoration: none;color: inherit;"><span style="margin: 0px; padding: 0px; color: rgb(70, 120, 134); text-decoration: underline; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">1/4-in Quick-Connect Pressure Washing Spray Nozzles, Set of 5</a><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">. Using a smaller size nozzle than recommended can also get the breaker to trip. &#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">A clog in the system could get the motor to draw more amperage.&#xA0;Please visually check the gun,&#xA0;hose,&#xA0;and unloader valve. You may have to take the unloader off the pump to visually inspect it.&#xA0;If the issue is an internal&#xA0;component&#xA0;of the unloader, you will not see anything.&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Please plug the motor back into the module.&#xA0;<ol style="list-style-type: decimal;margin-left: 0px;"><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span data-contrast="auto" lang="EN-US" class="TextRun SCXW215270335 BCX8" style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">Run the machine without a nozzle at the tip of the gun. If it works fine, then the nozzle is clogged.</li><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span data-contrast="auto" lang="EN-US" class="TextRun SCXW215270335 BCX8" style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">If it still trips the breaker, run it without the gun.</li><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span data-contrast="auto" lang="EN-US" class="TextRun SCXW215270335 BCX8" style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">If it still trips the breaker, run it without the hose.</li><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span data-contrast="auto" lang="EN-US" class="TextRun SCXW215270335 BCX8" style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">If it still trips the breaker, run it without the unloader.</li></ol><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: normal;">Note: The unloader valve is consumable and normally has a shorter life than the pump itself. A stuck unloader&#xA0;spring&#xA0;can also cause the breaker to trip.<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">At each of the above stages, please make sure you are feeding water into the pump.&#xA0;<ol start="5" style="list-style-type: decimal;margin-left: 0px;"><li style="margin-left: 24px; font-size: 16px; text-align: justify;"><span style="margin: 0px; padding: 0px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif; font-weight: bold;">If the breaker is still tripping, then please take the pump off the motor and run it. If the motor spins freely, and the breaker does not trip, please turn the pump shaft manually to see if there is any interference.</li></ol><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">What we are trying to figure out here is what&#xA0;component&#xA0;is causing the motor to work extra hard.&#xA0;<span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">Please reach out to us <a href="mailto:support@canpump.com" target="_blank" rel="noreferrer noopener" style="margin: 0px;padding: 0px;text-decoration: none;color: inherit;"><span style="margin: 0px; padding: 0px; color: rgb(70, 120, 134); text-decoration: underline; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;">support@canpump.com</a><span style="margin: 0px; padding: 0px; font-size: 16px; line-height: 25.575px; font-family: &quot;Barlow Condensed&quot;, &quot;Barlow Condensed_EmbeddedFont&quot;, &quot;Barlow Condensed_MSFontService&quot;, sans-serif;"> after this troubleshoot with your order number and findings. A short video of the system would be very helpful.&#xA0;

Electrical Circuit Breaker Tripping

Troubleshoot common issues faced with pumps & unloader valves

Troubleshooting Pumps & Unloader Valves

Use this form to contact us and receive replies by email (or even SMS, if you prefer that)

Monday – Friday 07:30 AM to 03:30 PM ET

« Back to store

Canpump CA

Having issues with your Canpump equipment? Please refer to these troubleshooting guides to identify & rectify the cause.